Class 11 Physics Notes
๐
- Unit 1 : Measurement
- Unit 2 : Vectors
- Unit 3 : Motion in Straight Line
- Unit 4 : Projectile Motion & Circular Motion
- Unit 5 : Laws of Motion
- Unit 6 : Work, Power & Energy
- Unit 7 : Rotational Motion
- Unit 8 : Gravitation
- Unit 9 : Elasticity
- Unit 10 : Hydrostatics
- Unit 11 : Hydrodynamics
- Unit 12 : Surface Tension
- Unit 13 : Thermometry and Calorimetry
- Unit 14 : Kinetic Theory of Gases
- Unit 15 : Thermodynmics
- Unit 16 : Transmission of Heat
- Unit 17 : Oscillations
- Unit 18 : Waves & Sound
Unit 6 : Work, Power and Energy
WORK,ENERGY AND POWER
Work
When a force acts on an object and the object actually moves in the direction of force, then the work is said to be done by the force.
Work done by the force is equal to the product of the force and the displacement of the object in the direction of force.
If under a constant force F the object displaced through a distance s, then work done by the force
W = F * s = F s cos ฮธ
where a is the smaller angle between F and s.
Work is a scalar quantity, Its S1 unit is joule and CGS unit is erg.
∴ 1 joule = 107 erg
Its dimensional formula is [ML2T-2].
Work done by a force is zero, if
(a) body is not displaced actually, i.e., s = 0
(b) body is displaced perpendicular to the direction of force, i.e.,
ฮธ = 90°
Work done by a force is positive if angle between F and s is acute angle.
Work done by a force is negative if angle between F and s is obtuse angle.
Work done by a constant force depends only on the initial and final Positions and not on the actual path followed between initial and final positions.
Work done by the force is equal to the product of the force and the displacement of the object in the direction of force.
If under a constant force F the object displaced through a distance s, then work done by the force
W = F * s = F s cos ฮธ
where a is the smaller angle between F and s.
Work is a scalar quantity, Its S1 unit is joule and CGS unit is erg.
∴ 1 joule = 107 erg
Its dimensional formula is [ML2T-2].
Work done by a force is zero, if
(a) body is not displaced actually, i.e., s = 0
(b) body is displaced perpendicular to the direction of force, i.e.,
ฮธ = 90°
Work done by a force is positive if angle between F and s is acute angle.
Work done by a force is negative if angle between F and s is obtuse angle.
Work done by a constant force depends only on the initial and final Positions and not on the actual path followed between initial and final positions.
Work done in different conditions
(i) Work done by a variable force is given by
W = ∫ F * ds
It is equal to the area under the force-displacement graph along with proper sign.
Work done = Area ABCDA
(ii) Work done in displacing any body under the action of a number of forces is equal to the work done by the resultant force.
(iii) In equilibrium (static or dynamic), the resultant force is zero therefore resultant work done is zero.
(iv) If work done by a force during a rough trip of a system is zero, then the force is conservative, otherwise it is called non-conservative force.
-Gravitational force, electrostatic force, magnetic force, etc are conservative forces. All the central forces are conservative forces.
- Frictional force, viscous force, etc are non-conservative forces.
(v) Work done by the force of gravity on a particle of mass m is given by W = mgh
where g is acceleration due to gravity and h is height through particle one displaced.
(vi) Work done in compressing or stretching a spring is given by
W = 1 / 2 kx2
where k is spring constant and x is displacement from mean position.
(vii) When on end of a spring is attached to a fixed vertical support and a block attached to the free end moves on a horizontal
table from x = x1 to x = x2 then W = 1 / 2 k (x2x2 – x2x1)
(viii) Work done by the couple for an angular displacement ฮธ is given by W = i * ฮธ
where i is the torque of the couple.
W = ∫ F * ds
It is equal to the area under the force-displacement graph along with proper sign.
Work done = Area ABCDA
(ii) Work done in displacing any body under the action of a number of forces is equal to the work done by the resultant force.
(iii) In equilibrium (static or dynamic), the resultant force is zero therefore resultant work done is zero.
(iv) If work done by a force during a rough trip of a system is zero, then the force is conservative, otherwise it is called non-conservative force.
-Gravitational force, electrostatic force, magnetic force, etc are conservative forces. All the central forces are conservative forces.
- Frictional force, viscous force, etc are non-conservative forces.
(v) Work done by the force of gravity on a particle of mass m is given by W = mgh
where g is acceleration due to gravity and h is height through particle one displaced.
(vi) Work done in compressing or stretching a spring is given by
W = 1 / 2 kx2
where k is spring constant and x is displacement from mean position.
(vii) When on end of a spring is attached to a fixed vertical support and a block attached to the free end moves on a horizontal
table from x = x1 to x = x2 then W = 1 / 2 k (x2x2 – x2x1)
(viii) Work done by the couple for an angular displacement ฮธ is given by W = i * ฮธ
where i is the torque of the couple.
power
The time rate of work done by a body is called its power.
Power = Rate of doing work = Work done / Time taken
If under a constant force F a body is displaced through a distance s in time t, the power
p = W / t = F * s / t
But s / t = v ; uniform velocity with which body is displaced.
∴ P = F * v = F v cos ฮธ
where ฮธ is the smaller angle between F and v.
power is a scalar quantity. Its S1 unit is watt and its dimensional formula is [ML2T-3].
Its other units are kilowatt and horse power,
1 kilowatt = 1000 watt
1 horse power = 746 watt
Power = Rate of doing work = Work done / Time taken
If under a constant force F a body is displaced through a distance s in time t, the power
p = W / t = F * s / t
But s / t = v ; uniform velocity with which body is displaced.
∴ P = F * v = F v cos ฮธ
where ฮธ is the smaller angle between F and v.
power is a scalar quantity. Its S1 unit is watt and its dimensional formula is [ML2T-3].
Its other units are kilowatt and horse power,
1 kilowatt = 1000 watt
1 horse power = 746 watt
Energy
Energy of a body is its capacity of doing work.
It is a scalar quantity.
Its S1 unit is joule and CGS unit is erg. Its dimensional formula is [ML3T-3].
There are several types of energies, such as mechanical energy (kinetic energy and potential energy), chemical energy, light energy, heat energy, sound energy, nuclear energy, electric energy etc.
It is a scalar quantity.
Its S1 unit is joule and CGS unit is erg. Its dimensional formula is [ML3T-3].
There are several types of energies, such as mechanical energy (kinetic energy and potential energy), chemical energy, light energy, heat energy, sound energy, nuclear energy, electric energy etc.
Mechanical Energy
The sum of kinetic and potential energies at any point remains constant throughout the motion. It does not depend upon time. This is known as law of conservation of mechanical energy. Mechanical energy is of two types:
1. Kinetic Energy
The energy possessed by any object by virtue of its motion is called its kinetic energy. Kinetic energy of an object is given by k = 1 / 2 mv2 = p2 / 2m
where m = mass of the object, U = velocity of the object and p = mv = momentum of the object.
2. Potential Energy
The energy possessed by any object by virtue of its position or configuration is called its potential energy.
1. Kinetic Energy
The energy possessed by any object by virtue of its motion is called its kinetic energy. Kinetic energy of an object is given by k = 1 / 2 mv2 = p2 / 2m
where m = mass of the object, U = velocity of the object and p = mv = momentum of the object.
2. Potential Energy
The energy possessed by any object by virtue of its position or configuration is called its potential energy.
There are three important types of potential energies
(i) Gravitational Potential Energy If a body of mass m is raised through a height h against gravity, then its gravitational potential energy = mgh,
(ii) Elastic Potential Energy If a spring of spring constant k is stretched through a distance x, then elastic potential energy of the spring = 1 . 2 kx2
The variation of potential energy with distance is shown in figure.
Potential energy is defined only for conservative forces. It does not exist for non-conservative forces.
Potential energy depends upon frame of reference.
(iii) Electric Potential Energy The electric potential energy of two point charges ql and q’l separated by a distance r in vacuum is given by
U = 1 / 4ฯฮฃ0 * q1q2 / r
Here 1 / 4ฯฮฃ0 = 9.0 * 1010 N-m2 / C2 constant.
(ii) Elastic Potential Energy If a spring of spring constant k is stretched through a distance x, then elastic potential energy of the spring = 1 . 2 kx2
The variation of potential energy with distance is shown in figure.
Potential energy is defined only for conservative forces. It does not exist for non-conservative forces.
Potential energy depends upon frame of reference.
(iii) Electric Potential Energy The electric potential energy of two point charges ql and q’l separated by a distance r in vacuum is given by
U = 1 / 4ฯฮฃ0 * q1q2 / r
Here 1 / 4ฯฮฃ0 = 9.0 * 1010 N-m2 / C2 constant.
Work-Energy Theorem
Work done by a force in displacing a body is equal to change in its kinetic energy. 
where, Ki = initial kinetic energy
and Kf = final kinetic energy.
Regarding the work-energy theorem it is worth noting that
(i) If Wnet is positive, then Kf – Ki = positive, i.e., Kf > Ki or kinetic energy will increase and vice-versa.
(ii) This theorem can be applied to non-inertial frames also. In a non-inertial frame it can be written as:
Work done by all the forces (including the Pseudo force) = change in kinetic energy in non-inertial frame.
where, Ki = initial kinetic energy
and Kf = final kinetic energy.
Regarding the work-energy theorem it is worth noting that
(i) If Wnet is positive, then Kf – Ki = positive, i.e., Kf > Ki or kinetic energy will increase and vice-versa.
(ii) This theorem can be applied to non-inertial frames also. In a non-inertial frame it can be written as:
Work done by all the forces (including the Pseudo force) = change in kinetic energy in non-inertial frame.
Mass-Energy Equivalence
According to Einstein, the mass can be transformed into energy and vice – versa.
When ฮm. mass disappears, then produced energy
E = ฮmc2
where c is the speed of light in vacuum.
When ฮm. mass disappears, then produced energy
E = ฮmc2
where c is the speed of light in vacuum.
Principle of Conservation of Energy
The sum of all kinds of energies in an isolated system remains constant at all times.
Principle of Conservation of Mechanical Energy
For conservative forces the sum of kinetic and potential energies of any object remains constant throughout the motion.
According to the quantum physics, mass and energy are not conserved separately but are conserved as a single entity called ‘mass-energy’.
According to the quantum physics, mass and energy are not conserved separately but are conserved as a single entity called ‘mass-energy’.
Collisions
Collision between two or more particles is the interaction for a short interval of time in which they apply relatively strong forces on each other.
In a collision physical contact of two bodies is not necessary. rrhere are two types of collisions:
1. Elastic collision
The collision in which both the momentum and the kinetic energy of the system remains conserved are called elastic collisions.
In an elastic collision all the involved forces are conservative forces.
Total energy remains conserved.
2. Inelastic collision
The collision in which only the momentum remains conserved but kinetic energy does not remain conserved are called inelastic collisions.
In an inelastic collision some or all the involved forces are non-conservative forces.
Total energy of the system remains conserved.
If after the collision two bodies stick to each other, then the collision is said to be perfectly inelastic.
In a collision physical contact of two bodies is not necessary. rrhere are two types of collisions:
1. Elastic collision
The collision in which both the momentum and the kinetic energy of the system remains conserved are called elastic collisions.
In an elastic collision all the involved forces are conservative forces.
Total energy remains conserved.
2. Inelastic collision
The collision in which only the momentum remains conserved but kinetic energy does not remain conserved are called inelastic collisions.
In an inelastic collision some or all the involved forces are non-conservative forces.
Total energy of the system remains conserved.
If after the collision two bodies stick to each other, then the collision is said to be perfectly inelastic.
Coefficient of Restitution or Resilience
The ratio of relative velocity of separation after collision to the velocity of approach before collision is called coefficient of restitution resilience.
It is represented by e and it depends upon the material of the collidingI bodies.
For a perfectly elastic collision, e = 1
For a perfectly inelastic collision, e = 0
For all other collisions, 0 < e < 1
It is represented by e and it depends upon the material of the collidingI bodies.
For a perfectly elastic collision, e = 1
For a perfectly inelastic collision, e = 0
For all other collisions, 0 < e < 1
One Dimensional or Head-on Collision
If the initial and final velocities of colliding bodies lie along the same line, then the collision is called one dimensional or head-on collision.
In Inelastic One Dimensional Collision
Loss of kinetic energy
ฮE = m1m2 / 2(m1 + m2) (u1 – u2)2 (1 – e2)
In Perfectly Inelastic One Dimensional Collision
Velocity of separation after collision = 0.
Loss of kinetic energy = m1m2 (u1 – u2)2 / 2(m1 + m2)
If a body is dropped from a height ho and it strikes the ground with velocity vo and after inelastic collision it rebounds with velocity v1 and rises to a height h1, then
If after n collisions with the ground, the body rebounds with a velocity vn and rises to a height
hn then
en = vn / vo = √hn / ho
ฮE = m1m2 / 2(m1 + m2) (u1 – u2)2 (1 – e2)
In Perfectly Inelastic One Dimensional Collision
Velocity of separation after collision = 0.
Loss of kinetic energy = m1m2 (u1 – u2)2 / 2(m1 + m2)
If a body is dropped from a height ho and it strikes the ground with velocity vo and after inelastic collision it rebounds with velocity v1 and rises to a height h1, then
If after n collisions with the ground, the body rebounds with a velocity vn and rises to a height
hn then
en = vn / vo = √hn / ho
Two Dimensional or Oblique Collision
If the initial and final velocities of colliding bodies do not lie along the same line, then the collision is called two dimensional or oblique Collision.
In horizontal direction,
m1u1 cos ฮฑ1 + m2u2 cos ฮฑ2= m1v1 cos ฮฒ1 + m2v2 cos ฮฒ2
In horizontal direction,
m1u1 cos ฮฑ1 + m2u2 cos ฮฑ2= m1v1 cos ฮฒ1 + m2v2 cos ฮฒ2
No comments:
Post a Comment